11kV three phase transformer
Product Description:
power grid transmission and distribution station, industry & commerce electrical substation as the electrical equipment of power transmission
star and:
GB1094.1-2013;GB1094.2-2013;GB1094.3-2013;GB1094.5-2008;GB/T6451-2008;GB/T 1094.10-2003;JB/T 10088-2004 IEC60076;SABS 780 STANDARDS
Features of Products:
1.Ratedvoltage:6.3kV,10kV,11kV,13.2kV,13.8kV,15kV,20KV,22KV,33KV,35KV
2.2.Rated power: 5kva-25000kva
3,Two windings or three windings
4,On-load or no-load voltage tapping changer
5.Frequency:50HZ/60Hz
6.Vector group: Dyn11,Yyn0, Ynd11, or others
7.Cooling: ONAN/ ONAF/ OFAF
8.Tap changer:3 levels; 5 levels; 7 levels; 13 levels; 17 levels
Service Condition
1.Suitable for indoor or outdoor application
2.Air temperature: Maximum temperature: +-40°C; Minimum temperature:-30°C
a.Humidity: Monthly average humidity 9596; Daily average humidity 90%6 .
b.Altitude above sea level: Maximum installation altitude: 2000m.
3.Max wind speed:35M/s
a.Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
b.No frequent violent shake.
Three phase oil immersed distribution transformer
KBSG mine flameproof dry-type transformer
Features of Products
The KBSG series mininq explosion isolation dry transforrner conforrns to new GB 8286, mineral product separates explode migration
transformer substation requests. lnsulating the materal adopts C class or H class to insulate, hot stablity good, cooling offiway a doption ANAN,be applicble to there are air and coaldust of the methane mixture, and there is the mineral well, mineral mountain,tunnel of explosion dangeretc. environment.also be applicable to shortage with air and steam environment which decays metals and breakage to insulate. Settle thefrequency as 50 Hz.aprimary voltage is 6 ks or 10 k's, andneuterqender not to connect ground for the power system,for use various motiveequipments in the environment with various use electricity device to provide power supply.
Standard
JB3955-1993;GB1094.1~2-1996;GB12173-2008;GB1094.3-2003;GB1094.5-2008
Using environment and working condition
1.The elevation is less than 1000m, the special environment gives the explanation in addition
2.Ambient temperature: Highest temperature+40C;Lowest temperature-5'C; Maximum daily average temperature +30C; Maximum annualaverage temperature +20°C; Lowest outdoor air temperature-5C;
3.The relative humidity is less than 95%(When the air temperature is 25℃);
4.In has the methane and the coal dust, also has the explosion hazard in the mine pit;
5.Does not have, the vibration as well as with the gradient does not surpass in 15 environment;
6.Does not have sufficiently the dipping and the insulation gas and the steam;
7.No-water drop place;
8.Power supply voltage profile is approximate to the sine wave;
9.The three-phase supply voltage approximate is symmetrical;(When extracts this condition stipulation, separate consultation)
33kV11kV dry-type transformer
Features of Products
33kV class Dry-type transformers are widely used in locallighting, high-rise buildings, airports, wharf CNC machinery and other places.
Simply speaking, dry-type transformers refer to transformers in which iron cores and windings are notimmersed in insulating
oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling(AF). During natural air cooling.
the transformer can operate continuously for a long time at rated capacity. When forced air cooling occurs, the output capacity of the transformer can be increased by 50%.
Suitable for intermittent overload operation or emergency overload operation; Since the load loss and impedance voltage increase greatly during overload and are in non-economic operation.
it should not be kept in continuous overload operation for a long time.
Standard
Full complied with GB/T 10228-2008; GB 1094.11-2007, IEC60076 STANDARDS
SCB10 SERIES 33kV CLASS DRY TYPE TRANSFORMER
11kv class dry type transformer
Features of Products
Dry-type transformers are widely used in local lighting, high-rise buildings, airports, wharf CNc machinery and other places.Simply speaking, dry-type transformers refer to transformers in which iron cores and windings are not immersed in insulating oi.Cooling methods are divided into natural air cooling(AN) and forced air cooling (AF).During natural air cooling.
the transformer can operate continuously for a long time at rated capacty. When forced air cooling occurs,the output capacity of thetransformer can be increased by 50%.
Suitable for intermittent overload operation or emergency overload operation; Since the load loss and impedance voltage increase greatly duringoverload and are in non-economic operation,
it should not be kept in continuous overload operation for a long time.
Sc(B)10 Series 11kv Class Dry Type Transformer Technical Data
ZT(P)S series phase-shifting rectifier transformer
Product Description
The converter transformer for variable frequency speed regulation is the power supply part of the high-voltage frequency converter. It plays the role of isolation, phase shifting and multiplexing. It is one of the core components of the high-voltage frequency converter. According to the cooling method, it is divided into dry type and oil-immersed type. kind.
The insulation grade of the dry-type converter transformer for variable frequency speed regulation produced by our company is Class H. The new insulation structure and advanced technology are used in the structural and electrical design to improve the short-circuit resistance and electrical strength, making the performance more reliable. During the design process, the impact of harmonics generated by rectifier components on the transformer windings and core is fully considered. Sufficient margin is provided to enable the windings and core to withstand the additional temperature rise caused by harmonics and maintain low noise, ensuring the reliability of the transformer. service life.
The winding temperature rise caused by harmonics is fully considered during design and manufacturing, which effectively ensures the service life of the transformer; VPI (vacuum pressure) impregnated paint and cured at high temperature have good moisture-proof, dust-proof, and anti-pollution effects, ensuring the reliability of the transformer. .
The materials selected undergo strict quality inspection, and all raw material manufacturers are strictly reviewed in accordance with ISO9001. The product has the characteristics of high reliability and is widely used with 6-pulse, 12-pulse, 18-pulse and multi-pulse frequency converters. According to the types of inverters and rectifiers and user requirements, special design and manufacturing plans are formulated.
Model Meaning
ZSCB double split rectifier transformer
ZSCB double-split epoxy resin cast rectifier transformer is a new high-tech dry-type rectifier transformer developed by our company. It is produced using high-quality materials and advanced production and testing equipment according to strict processes.
SC13/SC11 series special dry-type transformer for central cabinet
The three-phase dry type amorphous alloy core distribution transformer is a high-performance and energy-efficient power distribution solution. With its amorphous alloy core, this transformer offers reduced magnetic losses and improved efficiency, resulting in lower energy consumption. It is designed for applications where safety, reliability, and environmental concerns are paramount. This transformer is suitable for use in various industries, including manufacturing, commercial buildings, and infrastructure. It is easy to install and maintain, making it an ideal choice for modern power distribution systems.
SC(ZB) series dry type transformer
Resin insulated dry-type transformers are safe, flame retardant, non-polluting and can be installed directly in load centers.
DKDC grounding transformer
Grounding transformers are often used to provide an artificial loadable neutral point for system grounding at ungrounded points in the system. The neutral point of this product is connected to the arc suppression coil or resistor, and then grounded. It can be equipped with a secondary winding of continuous rated capacity as the power supply for the station (station).
Three-phase dry type amorphous alloy core distribution transform
The three-phase dry type amorphous alloy core distribution transformer is a high-performance and energy-efficient power distribution solution. With its amorphous alloy core, this transformer offers reduced magnetic losses and improved efficiency, resulting in lower energy consumption. It is designed for applications where safety, reliability, and environmental concerns are paramount. This transformer is suitable for use in various industries, including manufacturing, commercial buildings, and infrastructure. It is easy to install and maintain, making it an ideal choice for modern power distribution systems.